OMRON : X8MD1-M1G-Z

OMRON : X8MD1-M1G-Z

Sensing method Inductive type

Sensing distance 8 mm-10% to +10%

Setting distance 0 to 6.4 mm

Differential distance 10% Max. of sensing distance

Sensing object Ferrous metal (Sensitivity lowers with non-ferrous metals.)

Standard sensing object Iron 30 x 30 x 1 mm

Power supply voltage 12 to 24 VDC ripple(p-p) 10% Max.

Operating voltage range 12 to 24 VDC

Leakage current 0.8 mA max.

Control output (Output type) DC 2-wire models with polarity

Control output (Switching capacity) 3 to 100 mA

Control output (Residual voltage) 3 V Max.(under load current with cable length of 2 m)

Indicator Operation indicator (red), Operation setting indicator (green)

Operation mode NO

Sensitivity setting -

Self-diagnostic output -

Protective circuit Surge suppressor

Output short-cut protection

Standard or Different frequency Standard

Ambient temperature Operating: -25 to 70 ℃

Storage: -40 to 85 ℃

Ambient humidity Operating: 35 to 95%RH

Storage: 3595%RH

Temperature influence +/- 10% Max. of sensing distance in temperature range of -25 to +70 CEL

(As the basis for sensing distance of 23 CEL)

Voltage influence +/- 1% Max. of sensing distance in rated voltage range +/- 15%.

(As the basis for sensing distance at standard power voltage)

Insulation resistance 50 MOhm Min. at 500 VDC between charged parts and the case

Dielectric strength 1000 VAC 50/60 Hz for 1 minute between charged parts and the case

Vibration resistance 10 to 55 Hz, 1.5-mm double amplitude for 2 hours each in X, Y, and Z directions

Shock resistance 1000 m/s**2 for 10 times each in X, Y, and Z directions

Degree of protection IEC60529: IP67

Connection method M12 connector models

Weight (Packed state) approx. 25 g

Material (case) Brass nickel plating

Material (sensing surface) PBT

Material (clamping nuts) Brass nickel plating

Material (toothed washer) Iron zinc plating

Accessories Instruction manual